Description
To help get you started evaluating the NeoCortec Wireless Mesh Networking Protocol, we have designed an evaluation kit which will take you through a few easy steps that will enable you to start sending payload data from one PC to another through the NeoCortec network.
Quick Start Guide Tutorial Videos
Once the basic steps have been completed, you can start building your own application: NeoCortec has designed the evaluation board such that you can easily interface to your favourite host controller:
– USB link to a PC with 2 virtual COM ports. An Application Port to be used for sending and receiving payload data. A System Port to be used for setting the configuration parameters as well as uploading new software releases should they become available.
– Pin headers allow for easy integration to MCU eval boards or other development boards such as Arduino or similar.
In addition, evaluation boards are equipped with a temperature- and humidity sensor and a potentiometer to generate an analog input signal to the built-in A/D converter. Finally, there is a series of LEDs which can easily be connected to the GPIOs of the modules to test the digital outputs.
The evaluation kit comes with a USB stick, which includes PC tools for sending and receiving payload data through the wireless mesh network, and for configuring and updating the software inside the module. The evaluation kit contains 5 pcs of evaluation boards with the NCxxxx modules installed.
Need more evaluation boards?
Not a problem – evaluation boards are also available as stand alone items. You can find additional boards at our distributors. Afterwards, go to our Support section to find the evaluation kit software to get started.
Distributors
Contact
NAVIGATION
