Connect sensors and actuators across industrial sites, farms or smart buildings — with no wires, no power lines and no limits.
NeoCortec offers NeoMesh – a wireless communication protocol which allow you to build large IOT networks where all devices may run on batteries, where there are no practical limitation on how many devices are in the network and no need for mains powered routers / repeaters.
NeoMesh is a professional, agile, scalable, and ultra low power wireless connectivity solution. Our protocol is user-friendly during both development and installation of the IOT system. This results in a short time-to-market. With NeoMesh it has never been easier to create a complete, autonomous and self-containing wireless mesh-network targeting sensor type applications.
NeoMesh is a self-forming, flexible wireless network, easy to expand over time.
NeoMesh is a fully battery powered, virtually fail-proof network with built in redundancy.
NeoMesh is designed to simplify product development and reduce time to market.
NeoCortec’s proven mesh protocol is also available for radios using LoRa® modulation — combining long-range signal robustness with our ultra-low-power, self-forming mesh architecture.
Whether you choose regular FSK or LoRa® modulation, NeoMesh delivers scalable, battery-friendly mesh networking — on Sub-GHz and 2.4 GHz.
READ MORE ABOUT THE PROTOCOL
NeoMesh is essentially a software protocol stack. It allows you to build innovative products which will benefit from NeoMesh’s unique features. We understand that each product is different and each customer has different capabilities, which is why we have made NeoMesh available in multiple ways.
NeoMesh at the core. We offer the stack on a range of compatible SoC’s and Radios from different vendors. We also offer customized releases to fit your exact need.
Our Eco System Partners offers fully integrated solutions such as sensors, gateways and development boards. Additionally some partners offer modules with NeoMesh integrated.
NeoCortec manufactures a range of cost efficient modules which are pre-certified for major markets. In addition, we offer evaluation kits as well as development boards which helps you to start using NeoMesh in your products in no time.
READ MORE ABOUT THE PRODUCTS
The unique NEOCORTEC ultra low power Ad- Hoc Wireless Mesh Networking Protocol is available for both 2.4GHz as well as sub 1GHz frequency bands in a series of pre-approved modules. The modules are well suited for a broad range of applications, cost efficient and easy to integrate into the target product.
Form factor
Ultra compact
11 x 18 x 3 mm.
This whitepaper provides an overview of the design choices made to secure cable-like reliability in a NeoMesh wireless connectivity solution: mesh-type network topology, distributed network management, frequency hopping, dynamic routing etc.
In wireless communication “Low Power” has become an expression widely used – and abused. This whitepaper discusses the aspects you need to consider to get a realistic and accurate assessment of power consumption in a wireless sensor network.
NeoCortec was founded in 2007, with a mission to reinvent wireless sensor networks from the ground up. While most existing solutions were based on traditional IP protocols, we saw the opportunity to do something different — to develop a new kind of mesh technology that worked in real-time, at ultra-low power, and without the need for centralized control or network managers.
The result is NeoMesh — a fully decentralized, time-synchronized mesh protocol that scales efficiently and reliably, while keeping power consumption exceptionally low.
READ MORENeoCortec is pleased to announce, together with MikroElektronika (MikroE), the introduction of new Click Boards™ based on Neocortec modules. With the NeoMesh protocol being a natural choice when building battery powered, highly scalable and reliable wireless sensor networks, developers now have access to a large selection of MCU, sensor and other boards which can simply be clicked together to form a device.
NeoCortec has launched an extension to the already existing NeoGateway, which is a open source software solution intended to run on any Linux based GW, which allows the customer to automatically monitor the health of the deployed networks.
Tadiran batteries who is a leading manufacturer of batteries for wireless devices has written this whitepaper on battery selection. To ensure a long battery life in your IoT or sensor network device, you need to consider many aspects.
Any design engineer who integrates wireless technology into a product, has to consider what antenna to use. In NeoCortec, we often see that customers are struggling in this area. In order to provide more insight into the area of antennas, and to help design engineers to achieve a good design, we decided to sponsor a white paper which focuses on antennas for IoT applications and more specifically on low cost PCB antennas. We turned to antenna and IoT expert Mr. Harald Naumann who accepted the task to shre his knowledge and experience on the matter. The result is a 87 page comprehensive white paper....
NeoCortec, manufacturer of ultra-low-power bi-directional wireless mesh network modules, recently signed an agreement with Honeywell Building Technologies, a global leader in fire and life safety, to develop wireless fire detection devices that offer higher reliability, ease of installation and commissioning, and competitive cost of ownership.
The new location is situated in a large complex which is capable of supporting the growth plans and enables NeoCortec to continue to add more resources to support the business expansion.
NeoMesh is suitable for smart building, industrial agricultural and many other implementations. Read more here.